10 Best Homemade pipes and DIY bongs

Isn’t it just the pits when you’re ready to smoke only to realize that you don’t have anything to smoke with or out of on hand? You’ve probably been there before. Anyone who likes to smoke, whether you’re a stoner or an occasional smoker, has most likely found themselves facing this dilemma.

Not to worry! There are a number of household items that you can use to make a DIY or homemade smoking device. You don’t have to miss out entirely, just find a way to make it happen and we’re here to share with you just how you can do that!

There is no shortage of household items that you can use for such a purpose. It doesn’t matter why you found yourself without a pipe or a bong, you have options! It’s almost like a new adventure.

Below, you will find the best homemade smoking devices or homemade ways to smoke weed. The good news is that you will probably have these supplies on hand!

What to Roll Weed With?

The easiest way to smoke if you find yourself lacking supplies is to roll your own weed using household items to smoke weed out of. You can use things like cigarettes, gum wrappers, and more.

If you have any of the items listed below, then we recommend that you just go ahead and make use of those household items to smoke weed out of and get your high on. Why waste time with something more complicated? If this option suits you and you have any of these items below, just do it!

Put Weed in a Cigarette

One of the best homemade smoking devices is just making use of a cigarette. If you have cigarettes on hand, this something to smoke out of that really is one of the best solutions.

Not everyone has cigarettes on hand or even access to cigarettes but this is a common solution for the best homemade smoking devices if you do have them. It also makes it easy to smoke the weed as well.

1. Empty the cigarette of contents.
2. Stuff the cigarette with your weed. You can even mix the weed with the cigarette contents if you’d like.
3. Light the cigarette as normal.
4. Smoke and enjoy.

There you have it! A simple and yet effective way if you need something to smoke out of.

Rolling Paper Alternatives

In terms of other ways to smoke week with household items, you can try coming up with different parts that can act as rolling paper. If you don’t have a cigarette or rolling papers on hand, there are still plenty of things to smoke weed with out there.

If you want to make a joint, try out some of these additional options.

Gum Wrapper Joint

Have a pack of gum or even discarded gum wrappers laying around? This could be a great way to roll a joint using homemade products.

In this case, you will use the gum wrapper almost exactly the same way that you would use a rolling paper. Smooth it out, lay it out flat, place your herbs on the paper, and roll it up. Follow these steps to learn how to roll a joint with a gum wrapper.

1. Use your fingernail or a coin to scrape off or peel off the foil on the gum wrapper. It typically comes off pretty easily.
2. Crush your herbs if they need to be crushed and then place a small amount inside the wrapper.
3. Roll your gum wrapper by closing one end and leaving a slight opening at the other end for smoke to get through.
4. Light and smoke like a joint.

Roll a Rose Blunt

Another option for homemade weed pipes is a rose. This is not necessarily your easiest option but it is certainly one of the most exquisite options!

Not only with the rose petals add that floral aromatic but it will amplify the herb flavor while you are smoking it as well.

Here are some simple steps to how to make a rose blunt as ways to smoke weed with household items.

1. You will need rose petals as well as a baking pan.
2. Line three petals together on your pan, overlapping them on the edges.
3. Place the pan in your oven and bake at 250 for about 4 minutes.
4. Remove the pan. The petals should be dark in color.
5. Lick the bottom of the flower petal in order to make it stick and then arrange them into a row, overlapping the ends again to create your row.
6. Heat again in the oven for about 2 minutes.
7. Remove from the oven and rest for about 2 minutes.
8. Grind your herbs if necessary into a very fine grind. Place the ground herbs into the rose papers you’ve made.
9. Roll the blunt very tightly with the rose petals. You may need to tuck parts to get it tight and get it to hold.
10. Once rolled, place it back on the pan and put it back in the oven but for only about 10-20 seconds this time.
11. Finally, let the blunt rest for 2-5 minutes before smoking it and then enjoy!

Homemade Weed Pipes

Can’t find a wrapper or a cigarette? Maybe it is time to have a DIY pipe. There are a lot of different devices that you can use but in this part of our guide, we’re going to talk about some of the simplest and coolest ways to make your own DIY pipe device.

Tin Foil Pipes

Tin foil pipes make great DIY weed pipes and really all that you need is tin foil and your herbs to make them. This pipe will be a one hitter but it’s quick and easy to make.

How to Make an Aluminum Foil Pipe

Follow these steps to make an aluminum foil pipe as a DIY weed pipe. You just need your foil, a pen or a pencil, some scissors, and maybe a toothpick or a sharp-tipped object.

1. Start by cutting a long piece of foil. We recommend 12 x 12 inches. Be careful with the foil, you don’t want it to get too folded or wrinkled before you even start.
2. Fold the square horizontally and vertically until it becomes a 6 x 6-inch piece of aluminum foil. This gives it layers that you may need later.
3. Now, grab that pen or pencil. Put it across one corner of your foil and start rolling the foil around your pen until you get to the opposite corner. You can use your finger but a pen or pencil really works best.
4. Use the wider end of your foil as a chamber. Create a base somewhere around 1-inch from the end of the foil. Fold it over a business card or something similar to make it 90 degrees at the bend. Open it up there on the end to create a chamber for your weed.
5. If you want to add a filter, you can take another small piece of foil and poke holes in it. Then place it in the chamber.
6. Now, fill the chamber and simply enjoy your makeshift weed pipe.

This shouldn’t get too hot but if it does, you can always add more foil around the handle portion.

Apple Pipe

Next up, another great option for DIY smoking devices is an apple! You can use an apple to make a fruit pipe and not only does it work wonders but smoking out of an apple also gives you the added sensation and flavor of the fruit with your pot pipe.

How to Make an Apple Pipe

An apple pipe might also be used as an apple bong. It really just depends on your preferences and how you use it. This fruit pipe is fun and simple to work with.

To make a homemade apple pipe, you will need your choice of herbs, any choice of apple, and some sort of knife to prepare the apple. You can use a knife, stick, screwdriver, or anything with a poking end essentially.

Now, follow these steps to turn your apple into household pipes.

1. Start by twisting the stem off the apple.
2. Carve out a bowl in the top of the apple with your sharp utensil item. Go no farther than halfway into the apple for this.
3. On the apple, poke another hole into the face of the apple. You need to connect this hole with your bowl chamber.
4. You can press clear through the apple from your mouthpiece hole. This creates a carb to let air flow through.
5. Load up your fruit pipe and then proceed to use it just like any other hand pipe might be used.

Homemade Bong

There are two different types of DIY bongs that we feel are essential here. In this section, we will share both the homemade water bottle bong as well as the DIY gravity bong, giving you two choices.

How to Make a Water Bottle Bong

Here are the steps for you to attempt this particular option. It’s pretty simple if you have an old or empty water bottle laying around.

1. You can use either a soda bottle or a water bottle. We recommend a bottle that is around 17 ounces. Remove the label and take off the lid. You won’t need those.
2. Tear off or cut off a square of aluminum foil, approximately the size of your palm. You may need to double layer if your foil isn’t very thick.
3. Place the foil over the bottle cap opening at the top of the bottle and fold the foil over the sides so it grips the bottle.
4. Use your finger and make a small indention in the foil. This is going to become the bowl to hold your herbs.
5. Poke a few holes in the foil using a toothpick or a needle. You just need a few tiny holes, not close together.
6. Make a hole about a quarter of a way from the bottom of the bottle. Probably near where the bottom of the label used to be. The holes needs to be about an inch in diameter
7. Load the foil piece with herbs and light it and use the other hole to inhale.
8. Enjoy!

How to Make a Gravity Bong

This gravity bong is very easy to make but it does take a little getting used to so be sure to pay close attention to the steps. You can also make a waterfall bong using a water bottle.

Follow these steps to your next makeshift bong.

1. Grab a socket, a water bottle, and a basin or a container you can put water in.
2. Fill up the basin with water.
3. Burn the center of your bottle cap and push a socket through it so that it is snug and it.
4. Cut the bottom off of your water bottle
5. Push the bottle into your water bin to fill it with water
6. Fill up your socket with marijuana and screw the cap onto the bottle.
7. Light your socket and slowly pull the bottle up to create a vacuum. You do not want to pull it completely out of the water.
8. When your water reaches bear the bottom of your bottle, remove your cap and inhale, simultaneously pushing back down the bottle into the water.

This process might take some getting used to but it works really well when you do.

Soda Can Pipe

Forget the bottles and papers and apples and just grab that empty soda can to make a pipe. You just need the soda can and something to poke it with.

How to Make a Bong Out of a Can

If you want one of the easiest DIY bongs, you can make a pipe with a soda can and it’s one of the simplest processes around.

Follow these steps on how to make a bong out of house hold items like your soda can.

1. Make sure the can is empty.
2. Poke a hole into the side of the can, near the bottom of the can. Your hole should be smooth and not jagged.
3. Slightly indent the can right around the hole to make a bowl for the weed.
4. Now make another, similar hole on the side of the can for your mouthpiece. Again, be sure it is not jagged.
5. Fill up your bowl area, light the herb and use the mouthpiece to enjoy your herb just like any other pipe.

Pen Pipe

1. Take the pen apart, leaving just the tube and metal pointed piece.
2. Place your metal piece back in the pen backwards.
3. Fill the metal piece with herbs.
4. Use the bottom of your pen as a mouthpiece.
5. Light up and enjoy!

Homemade Weed Bowl

You can use a pumpkin, watermelon, or another fruit or vegetable to create a bowl for yourself.

How to Make a Smoking Bowl out of a Melon

Follow these simple steps for making a bowl using a melon. You can use any type of melon but it is best if it is mostly round.

1. Carve a small bowl space into the top of the melon. You just need it large enough to hold the herbs so it doesn’t have to be huge unless you want it to be.
2. Poke a hole through the melon that coincides with the bowl that you made. You should poke the hole clear through to the other side to provide ventilation for the smoke.
3. Now, simply load up the bowl you created in the melon with your favorite herb.
4. Light the herb and inhale through the other hole that you made in the face of the melon.
5. Enjoy the fruity and earthy flavors mingled together!

Starburst Pipe

Finally, we have one fruity masterpiece that can also be a tad messy. If you’re ok with the mess, this might be one of the best homemade pipes around.

How to Make a Starburst Pipe

1. Unwrap a package of starbursts
2. Stack all but two together
3. Push a skewer through the Starbursts to hold them together and create an air space.
4. Place the 2 remaining Starbursts on top towards one end to help create a bowl.
5. Poke a hole from those 2 down to the skewer hole.
6. Shape your bowl to desired size.
7. Now light up and enjoy!

If you prefer, you can also mash the Starbursts together and form the entire pipe like you were using clay.

Final Thoughts on DIY Pipes

If you’ve found yourself in a place where you need to make your own bong or other device for enjoying your herbs, any of these will do! You can have fun with the process or simply enjoy the ease of a DIY bong from home.

The quality of weed that you use in your homemade devices can make a significant difference. In our dispensaries, you will find the highest quality strains. Visit one of our convenient locations.

Photo sources:
https://www.shutterstock.com
https://www.wikihow.com
https://hightimes.com
https://herb.co